SignaMax SC30010, Справочное руководство CLI

Страница: 72 / 671

Chapter 2
| Using the Command Line Interface
CLI Command Groups
– 72 –
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
GC (Global Configuration)
IC (Interface Configuration)
IPC (IGMP Profile Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
VC (VLAN Database Configuration)
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, voice VLANs, and QinQ
tunneling
441
Class of Service Sets port priority for untagged frames, selects strict priority
or weighted round robin, relative weight for each priority
queue, also sets priority for DSCP
471
Quality of Service Configures Differentiated Services 483
Multicast Filtering Configures IGMP multicast filtering, query, profile, and
proxy parameters; specifies ports attached to a multicast
router; also configures multicast VLAN registration, and
IPv6 MLD snooping
494
Link Layer Discovery
Protocol Configures LLDP settings to enable information discovery
about neighbor devices
554
Domain Name Service Configures DNS services. 578
Dynamic Host
Configuration Protocol
Configures DHCP client and relayfunctions 588
IP Interface Configures IP address for the switch interfaces; also
configures ARP parameters
599
IP Routing Configures static and dynamic unicast routing 637
Debug Displays debugging information for all key functions
These commands are not described in this manual.
Please refer to the prompt messages included in the CLI interface.
Table 4: Command Group Index
(Continued)
Command Group Description Page