SignaMax SC30010, Справочное руководство CLI

Страница: 134 / 671

Chapter 4
| System Management Commands
Time
– 134 –
sntp poll
This command sets the interval between sending time requests when the
switch is set to SNTP client mode. Use the
no form to restore to the default.
Syntax
sntp poll seconds
no sntp poll
seconds - Interval between time requests.
(Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Example
Console(config)#sntp poll 60
Console#
Related Commands
sntp client (133)
sntp server
This command sets the IP address of the servers to which SNTP time
requests are issued. Use the this command with no arguments to clear all time
servers from the current list. Use the
no form to clear all time servers from the
current list, or to clear a specific server.
Syntax
sntp server [ ip1 [ ip2 [ ip3 ]]]
no sntp server [ ip1 [ ip2 [ ip3 ]]]
ip - IPv4 or IPv6 address of a time server (NTP or SNTP).
(Range: 1 - 3 addresses)
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command specifies time servers from which the switch will poll for time
updates when set to SNTP client mode. The client will poll the time servers in
the order specified until a response is received. It issues time synchronization
requests based on the interval set via the
sntp poll command.