SignaMax SC30010, Справочное руководство CLI

Страница: 200 / 671

Chapter 8
| Authentication Commands
RADIUS Client
– 200 –
Syntax
[ no ] radius-server index host host-ip-address [ acct-port acct-port ]
[ auth-port auth-port ] [ key key ] [ retransmit retransmit ]
[ timeout timeout ]
index - Allows you to specify up to five servers. These servers are
queried in sequence until a server responds or the retransmit period
expires.
host-ip-address - IP address of server.
acct-port - RADIUS server UDP port used for accounting messages.
(Range: 1-65535)
auth-port - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
key - Encryption key used to authenticate logon access for client.
Enclose any string containing blank spaces in double quotes.
(Maximum length: 48 characters)
retransmit - Number of times the switch will try to authenticate
logon access via the RADIUS server. (Range: 1-30)
timeout - Number of seconds the switch waits for a reply before
resending a request. (Range: 1-65535)
Default Setting
auth-port - 1812
acct-port - 1813
timeout - 5 seconds
retransmit - 2
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 port 181 timeout 10
retransmit 5 key green
Console(config)#
radius-server key
This command sets the RADIUS encryption key. Use the no form to restore
the default.
Syntax
radius-server key key-string
no radius-server key
key-string - Encryption key used to authenticate logon access for
client. Enclose any string containing blank spaces in double quotes.
(Maximum length: 48 characters)