Siemens SIMOTICS FD 1LL1, Инструкция по эксплуатации и установке

Страница: 150 / 188

3. Prepare the bearing seats:
– Lightly oil the inner ring seat.
– Grease the outer ring seat with a solid lubricant such as Altemp Q NB 50.
– Press the inner bearing cover onto the shaft.
4. Warm up the roller bearing.
5. Push the inner ring of the warmed up roller bearing onto the shaft. Avoid any blows that
might damage the bearing.
6. Make sure that the roller bearing is resting against the shaft shoulder or the second bearing.
7. Fill the bearing to the top with the specified lubricating grease as stamped on the lubricant
plate.
8. Warm up the grease slinger and push it onto the shaft.
9. Depending on the particular version, fix the bearing with a locking ring or shaft nut.
10.Support the rotor when installing the bearing housing or bearing end shield.
11.Use a suitable sealant when assembling.
12.Assemble the bearing shield or bearing housing together with the bearing shield.
13.Install the outer bearing cover if one is being used.
14.Install the sealing elements:
If present: V ring (Page 150)
Labyrinth sealing ring (special design) (Page 152)
9.2.3.5 Install the V ring
Requirement
The roller bearing is already fitted.
Maintenance
9.2 Corrective Maintenance
SIMOTICS FD 1MH1
150
Operating Instructions 08/2017