Siemens SIMATIC MV540 H Скачать руководство пользователя страница 73

Страница: 73 / 238

Mounting

5.5 Mounting with external ring light

SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01

Proceed as follows to mount the SIMATIC MV540 optical reader with an external ring light:
1.

Remove the protective cap for the lens threads.

When using an E-focus lens: Insert the straight connector of the lens cable into the

interface of the reader (a).

Screw the desired lens into the lens mount of the reader.
When using an E-focus lens: Ensure the correct alignment of the lens. If needed, use the

knurled nut/washer to align it so that the interface is close to the cutout/interface.

When using an E-focus lens: Use the lens cable to connect the E-focus lens to the

reader.
Insert the angled connector of the lens cable into the interface of the lens.

Insert the micro SD adapter into the reader interface provided.
If needed, insert a micro SD card into the adapter

Screw the D65 protective lens barrel (article number 6GF3540-8AC11) onto the reader.

Mount the ring light holder on the reader with the 4 screws (1-2 Nm) that are supplied.

Mount the external ring light to the ring light holder (1-2 Nm) with the 2 supplied fastening

screws.

Mount the reader on a suitable mounting fixture or holder (4x M4, 1-2 Nm).
Use the mounting plate for SIMATIC MV500 or a mounting device with matching holes.
Note that the reader has two different drilling templates (50 x 60/57 x 57).

10.Select a suitable location to install the device.

Содержание SIMATIC MV540 H















































































































































































































































Результаты поиска

Содержание SIMATIC MV540 H

Отзывы:

Похожие инструкции для SIMATIC MV540 H

Бренды по названию

Популярные бренды

Siemens SIMATIC MV540 H, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC MV540 H

Отзывы:

Похожие инструкции для SIMATIC MV540 H

Бренды по названию

Популярные бренды