Siemens SIMATIC MV540 H Скачать руководство пользователя страница 6

Страница: 6 / 238

Preface

SIMATIC MV500

Operating Instructions, 06/2018, C79000-G8976-C494-01

General

●

Check regularly that the device complies with these recommendations and/or other

internal security policies.

●

Evaluate your plant as a whole in terms of security. Use a cell protection concept with

suitable products.

●

Do not connect the device directly to the Internet. Operate the device within a protected

network area.

Physical access

●

Restrict physical access to the device to qualified personnel.

●

Lock unused hardware ports on the device. Unused ports can be used to access the

system without authorization.

Software (security functions)

●

Keep the software up to date. Keep yourself informed regularly about safety updates for

the product.

You can find information about this at Link: (

http://www.siemens.com/industrialsecurity

)

●

Activate only protocols that you actually need to use the device.

●

Limit access to the device using a firewall or rules in an access control list (ACL).

●

The configuration files are available in XML format for simple use. Make sure that the

configuration files outside the device are suitably protected. You can, for example,

encrypt the files, store them at a safe location and transfer them only via secure

communications channels.

●

We recommend that you disable the "CONNECT" function after initial commissioning.

●

The functions for archiving as well as the remote functions (MMI) may only be activated in

networks protected by a firewall.

Passwords

●

Activate user management and create new user profiles.

●

Change all default passwords for users before operating the device.

●

Only use passwords with high password strength. Avoid weak passwords, e.g.

password1, 123456789, abcdefgh.

●

Define rules for using devices and assigning passwords.

●

Make sure that all passwords are protected and inaccessible to unauthorized personnel.

●

Do not use the same password for different users and systems.

●

Update passwords and keys regularly to improve security.

Содержание SIMATIC MV540 H















































































































































































































































Результаты поиска

Содержание SIMATIC MV540 H

Отзывы:

Похожие инструкции для SIMATIC MV540 H

Бренды по названию

Популярные бренды

Siemens SIMATIC MV540 H, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC MV540 H

Отзывы:

Похожие инструкции для SIMATIC MV540 H

Бренды по названию

Популярные бренды