Siemens SIMATIC MV540 H, Руководство по эксплуатации

Страница: 173 / 238

Process interfacing via an automation system (PLC, PC)
9.9 Example programs
SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01
173
Area: Control
In this area, you can establish/terminate the connection to the reader and start/stop the
transmission of the diagnostic data.
Click the "Open Connection" button to set up the connection between the PC and the optical
reader. After the optical reader has established the connection with the PC, start sending the
diagnostic data by clicking the "Start Recording" button.
Note
Connection cannot be set up
If the optical reader cannot set up a connection to the PC, the message "Waiting for
Connection..." appears on the screen.
First check whether the connection settings are configured correctly in the example program
and in the optical reader. Check the firewall settings if the optical reader cannot set up a
connection despite correct configuration.
In this case, contact the network administrator, if necessary.
To stop transferring the diagnostic data, click on the "Stop Recording" button. Click the
"Close Connection" button to terminate the connection between the PC and the optical
reader.
Area: Status
This area displays the current status of the example program.
You can see the following information when recording is active:
● Last image received in 320 x 240 pixel format.
● The number of images and diagnostic entries already received.
The program status is also shown in the left sheet bar of the dialog box.