7
Operation
7.1
Structure of the user interfaces
Overview
The system has user interfaces with different functions:
Figure 7: Structure of the user interfaces
1
Master Page
2
Visualization
on the display (SID)
3
Configuration of
the individual SIMs (Standard Page)
Master Page
The master SIM displays the
Master Page
where information on the system status
or status of the controller can be accessed. The user Run can view the status of
the overall system via the status messages. The display also shows the status of the
system. The Standard Page can be reached from the Master Page
(Open Standard
Page
).
For activities such as configuration or adjustments, the Authorized Client user can log
on directly to the respective evaluation unit (SIM).
IP address
•
SIM_Left_Master: http://192.168.0.1
Visualization
The Sensor Integration Display (SID) shows the interface for
visualizing
the overall
system for the operator. The SID is set to display this visualization directly.
IP address
•
SID: http://192.168.0.10
Configuration
The inspections are
configured
via the respective
Standard Page
of each individual
Sensor Integration Machine (SIM). The Standard Page is used to configure the Ranger3
cameras and articles, and to set up the inspections for each SIM individually.
To display the Standard Page, a computer must be connected. The IP address of the
relevant page is opened via the computer using the browser.
Typical IP addresses of the SIMs (these may differ depending on the configuration):
IP addresses
•
SIM_Middle: http://192.168.0.2
•
SIM_Right: http://192.168.0.3
OPERATION
7
8027445/V1-0/2022-06-15 | SICK
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
19
Subject to change without notice
