manualshive.com logo in svg

SICK FOS-HVS Duo 1600, Руководство по эксплуатации

Поделиться
Скачать
SICK FOS-HVS Duo 1600 Скачать руководство пользователя страница 42

Reference images

The reference image is required for setting up the inspections. It is recommended to
take an image of an OK part as a reference image. This makes it easier to set the target
values and the tolerances (e.g., for screw inspection).

7.5.4.2.1

Preprocessing

 tab

The 

Preprocessing

 tab is used to configure the settings for image preprocessing.

Figure 35: Camera menu page, Preprocessing

Function

Description

1

This option supports system maintenance and further development.

NOTE

 This option is not required in check mode. Since this option uses up

additional time, it should always be deactivated in inspection mode.

2

The Median filter is used for image preprocessing. This parameter must not be
changed.
The filter size can be changed using the – and + buttons. The default setting is
filter size 2

3

Image preprocessing is used to improve the evaluability of the camera image.

4

Calibrate camera image.

5

Perform image preprocessing and calibration in one sequence.

7.5.4.2.2

3D Image Settings

 tab

The 

3D Image Settings

 tab is used to configure the 3D settings for the heightmap and

height range.

Figure 36: Camera menu page, 3D Image Settings

7 

OPERATION

42

O P E R A T I N G   I N S T R U C T I O N S | FOS-HVS

8027445/V1-0/2022-06-15 | SICK

Subject to change without notice

Содержание FOS-HVS Duo 1600







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды