Function
Description
1
Activates the limitation of the angle to a semicircle (e.g. 180°).
2
This can be entered manually or determined automatically.
3
Automatically apply a specified angle.
7.5.6
Basic ROI
menu group
Inspection regions can consist of basic regions
(Basic ROIs
). Or they can consist of basic regions in which special regions (
) of type
ROI Simple
,
ROI Circle
,
ROI Screw
or
ROI Seal
are
masked and excluded from the evaluation when searching for foreign bodies in the
inspection region.
7.5.6.1
Basic ROI
page
Overview
The
Basic ROI
menu item is used to create a region as a basis for checking for foreign
objects. The surface of an inspection object is typically divided into different regions.
The system supports three different types of regions:
•
Rectangle: rectangular region
•
Ellipse: circular region
•
Polygon/freeform region: arbitrary number of points to describe irregular regions
General functions
Figure 56: Basic ROI, General functions
Function
Description
1
Create a new object of type Region (type Rectangle, Ellipse or Polygon).
2
Delete the active region.
3
Duplicate the active region. This allows the copy of this region to be used by
moving it to another location or transferring it to another camera.
4
Apply current settings.
The Teach State changes from
to
once the settings have been applied.
NOTE
For all changes in the Common and ROI tabs, the
Teach
button must
be pressed to apply the changes.
7
OPERATION
58
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
8027445/V1-0/2022-06-15 | SICK
Subject to change without notice
