7.5.7
Special Feature
menu group
The
Special Feature
menu group brings together different types of special regions. These
are used to exclude from a region areas where inspection is not performed or is
performed with different settings. This allows specific objects in a region (such as
screws or rivets) to be omitted and then treated separately as required.
These special functions are:
•
ROI Simple
•
ROI Circle
•
ROI Screw
•
ROI Seal
7.5.7.1
ROI Simple
page
Overview
The
ROI Simple
function can be used to omit self-created regions in an evaluation region.
Example
In one region there is a hole for a screw. This hole and the screw inside it should not be
detected as a foreign object when searching for foreign objects. This region is therefore
omitted from the check.
To do so, a special
ROI Simple
region is created and placed on the screw. It is the
operator’s responsibility to ensure that this region is placed on the correct basic ROI!
Verification by the system is not possible.
7.5.7.1.1
Common
tab
Common tab
Figure 64: ROI Simple, Common tab
Function
Description
1
Input field for name assignment.
2
Select the basic ROI from which the respective region is to be subtracted. This
field is designed as a drop-down list to select only regions that are already
available.
Apply the selection by clicking the
Select
button.
3
Apply the selection.
4
Enable/disable the region that has been set up (enabled by default).
After clicking the
Teach
button, the ROI is displayed.
7
OPERATION
64
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
8027445/V1-0/2022-06-15 | SICK
Subject to change without notice
