Figure 62: Basic ROI, ROI tab, Polygon selection
Function
Description
1
Select the next point to be edited from the drop-down menu.
2
X-coordinate of the active point.
Larger values move the point to the right, smaller values to the left.
3
Y-coordinate of the active point.
Larger values move the point down, smaller values move it up.
4
Insert a point before the current point in the sequence (midway between the two
previously adjacent points).
If the current point has the number 1, the new point will have the number 1.
NOTE
In the default rectangle when creating a new freeform region, the
points are numbered clockwise (point 1 = upper left point). By moving the
individual points, however, it is possible to have the points numbered in counter‐
clockwise ascending order. This must be taken into account when inserting.
5
Insert a point after the current point in the sequence (midway between the two
previously adjacent points).
The new point gets an index 1 higher than the current point. The subsequent list
of points is renumbered in ascending order.
6
Regardless of the current point, insert a point at the end of the sequence
(midway between the last point and point 1).
7
Delete current point.
The subsequent point then becomes the active point and receives the number of
the deleted point.
If the current point is the last point of the sequence, the second to last point
becomes the new active point.
When only four points remain, the button becomes inactive.
8
Delete last point in the sequence.
If the current point is the last point of the sequence, the second to last point
becomes the new active point.
When only four points remain, the button becomes inactive.
7
OPERATION
62
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
8027445/V1-0/2022-06-15 | SICK
Subject to change without notice
