Function
Description
3
Width of the rectangle.
If this value is changed, the width is aligned symmetrically about the midpoint.
4
Height of the rectangle.
If this value is changed, the height is aligned symmetrically about the midpoint.
5
The angle determines the orientation of the rectangle.
If the angle = 0°, the height is vertical and the width is horizontal.
If the angle = 90°, the height is horizontal and the width is vertical.
Ellipse
selection
The following configuration options are available for the
Ellipse
selection. The settings
can also be adjusted directly in the image using the mouse.
Figure 61: Basic ROI, ROI tab, Ellipse selection
Function
Description
1
X value/column value of the midpoint of the ellipse.
Larger values shift the midpoint to the right, smaller values to the left.
2
Y-value/line value of the midpoint of the ellipse.
Larger values shift the midpoint downward, smaller values shift it upward.
3
The angle determines the orientation of the ellipse.
For an angle = 0°, radius 1 changes the width of the ellipse and radius 2
changes the height.
For an angle = 90°, radius 1 changes the height of the ellipse and radius 2
changes the width.
4
Radius along the major semi-axis of the ellipse.
5
Radius along the minor semi-axis of the ellipse.
NOTE
If the same value is selected for radius 1 and radius 2, a circle is
created.
Polygon
selection
The points of a polygon are numbered in ascending order from the starting point (point
1). When inserting or deleting points, a renumbering occurs.
The points can be positioned graphically or using the configuration options in the
window shown below.
OPERATION
7
8027445/V1-0/2022-06-15 | SICK
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
61
Subject to change without notice
