manualshive.com logo in svg

SICK FOS-HVS Duo 1600, Руководство по эксплуатации

Поделиться
Скачать
SICK FOS-HVS Duo 1600 Скачать руководство пользователя страница 60

Figure 58: Basic ROI, Options tab

Function

Description

1

Show region (enabled by default).

2

Show result region.

3

Parameters for development. This can be used to display the debug region used
for system maintenance.

4

This option supports system maintenance and further development.

NOTE

 This option is not required in check mode. Since this option uses up

additional time, it should always be deactivated in inspection mode.

7.5.6.1.3

ROI

 tab

The radio button can be used to choose between rectangle, ellipse, and polygon.

Figure 59: Basic ROI, ROI tab

Rectangle

 selection

The following configuration options are available for the 

Rectangle

 selection. The settings

can also be adjusted directly in the image using the mouse.

Figure 60: Basic ROI, ROI tab, Rectangle selection

Function

Description

1

X-value/column value of the midpoint of the rectangle.
Larger values shift the midpoint to the right, smaller values to the left.

2

Y-value/line value of the midpoint of the rectangle.
Larger values shift the midpoint downward, smaller values shift it upward.

7 

OPERATION

60

O P E R A T I N G   I N S T R U C T I O N S | FOS-HVS

8027445/V1-0/2022-06-15 | SICK

Subject to change without notice

Содержание FOS-HVS Duo 1600







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды