4
Mounting
4.1
Important information
NOTICE
All transport, assembly, mounting, and electrical installation work must only be carried
out by qualified persons.
•
Qualified persons have the specialist training, skills, experience and knowledge
of the relevant regulations and standards needed to be able to perform work
assigned to them and to identify and avoid any potential dangers independently.
•
Electricians have the professional training, skills, experience and knowledge of the
relevant standards and provisions needed to work on electrical systems and to
detect and avoid any potential dangers independently.
4.2
System requirements
Connection to the voltage supply and network
•
Supply voltage 24 V DC
•
ProfiNet for communicating with the higher-level system
Operation site
•
Closed room
•
Flat and firm surface
•
Low-vibration environment
•
Protected from wind and free of drafts
•
Clean and dry (20% to 80% air humidity, non-condensing)
•
Ambient temperature between 0 °C and 45 °C
NOTE
Avoid strong temperature fluctuations.
NOTE
The cooling fins of the SIM4000 must not be covered or restricted in their functionality.
NOTE
Ambient light shielding
To achieve consistently reliable inspection results, even at different times, the complete
test cell must be protected against extraneous light if necessary.
Access and space requirements
•
The measuring point must be accessible for installation, alignment, and mainte‐
nance work.
•
Regardless of the space required for the devices, there must be enough space at
the operation site for the following activities:
°
Mounting and alignment
°
Operation of the FOS-HVS Foreign Object Detection System
°
Cleaning, maintenance, and service
4
MOUNTING
16
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
8027445/V1-0/2022-06-15 | SICK
Subject to change without notice
