SICK FOS-HVS Duo 1600 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 102

background image

The entries displayed here may vary depending on the logged-in user. Only those menu
items are displayed for which the user has the appropriate rights. Headings (menu
groups) above a group of menu items are displayed even if the logged-in user has no
rights for any of the submenus.

7.2.1.3

Main window

Application-specific information is displayed in the main window of the application.
General information is displayed in the title of the main window.

Depending on the displayed area, the main window may appear divided into two parts.

•

Left area: block for the actions for the selected menu item. This is where settings
for the cameras, for articles, for image storage and transmission, etc. are config‐
ured.

•

Right area: Image display.

7.2.1.4

Status bar

The status bar is present in all interfaces. For the SID, the status refers to the entire
system. For the SIMs, the status refers to the respective component.

Figure 10: Status bar

Range

Description

1

The currently logged in user is displayed in the status bar at the bottom left.
Clicking on the user name opens the login dialog, which can be used to log in as
another user.

2

To the right of the displayed user is the status bar. The system displays messages
to the user here (e.g., if a camera is not available). Each message in the status
line is overwritten by the subsequent message. The messages are displayed here
on one line. The last status entry always remains visible until a more current
message is displayed.
Example: The message “Master: Ready to inspect article 01 with serial number
12345678” is displayed on the status line. Once the article ID has been received
by the FOS system, the FOS system confirms this to the PLC. The scan run is then
started.

3

The system status is displayed via the

System Ready

signal at the bottom right of

the status bar.

7.2.2

Application

menu group

7.2.2.1

Settings

page

The settings can be used to select the language, units, and display mode.

To change the settings, you need to first click on the pencil icon.

OPERATION

7

8027445/V1-0/2022-06-15 | SICK

O P E R A T I N G I N S T R U C T I O N S | FOS-HVS

21

Subject to change without notice

«
...
19
20
21
22
23
...
»

Содержание FOS-HVS Duo 1600







































































































Отзывы:

Нет отзывов

Похожие инструкции для FOS-HVS Duo 1600

SafetuNet Alert

Бренд: Masimo Страницы: 2

Бренд: Abicor Binzel Страницы: 92

Бренд: Rain-Flo Irrigation Страницы: 16

FreeStyle Comfort

Бренд: CAIRE Страницы: 33

Бренд: d.s.f. Страницы: 8

PowerXL DX-NET-ETHERNET2-2

Бренд: Eaton Страницы: 48

Power Xpert C445

Бренд: Eaton Страницы: 2

Pro Vantage 12+ Series

Бренд: Ecco Страницы: 6

Бренд: Eaton Страницы: 16

Бренд: Eaton Страницы: 6

Бренд: Ecco Страницы: 17

COOPER POWER SERIES

Бренд: Eaton Страницы: 8

Бренд: Garmin Страницы: 20

Aspect Q-CARD 100-4T

Бренд: idi Страницы: 38

Бренд: Keller Страницы: 12

Бренд: MacDon Страницы: 49

Бренд: MacDon Страницы: 49

Бренд: MacDon Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды