manualshive.com logo in svg

SICK FOS-HVS Duo 1600, Руководство по эксплуатации

Поделиться
Скачать
SICK FOS-HVS Duo 1600 Скачать руководство пользователя страница 68

Figure 69: ROI Circle, Parameters tab

Function

Description

1

Parameters for object search

Light

: Circles to be found automatically are brighter and thus higher than the

surroundings in the region.

Dark

: Circles to be found automatically are darker and thus deeper than the

surrounding area in the region.

NOTE

 Image processing refers to height differences, which are displayed as

brightness differences in the heightmap.

2

Check mode

Dynamic

: Check mode for inhomogeneous surfaces with varying height.

Absolute

: Check mode for planar surfaces with a uniform height.

The 

Check Mode

 setting affects the 

Param. Dynamic

 and 

Param. Absolute

 window.

Only the available parameters of the selected 

Check Mode

 are activated.

3

Minimum height at which the circles for the recesses must be located. This
value indicates how far (in mm) the circle region must be above the surrounding
surface.

4

Minimum diameter (in real dimension [mm]) of the circles to be searched. Small‐
est possible value: 1.0.
Only circles that meet the previous conditions and have the minimum diameter
specified here are searched for.

NOTE

 The diameter must not be chosen too small, as this can cause circles

to be placed in structures that do not correspond to the desired circles. These
circles result from the selected parameters and the inhomogeneous surface of
the inspection object. The number of circles found and the number of circles
expected therefore do not match.

7 

OPERATION

68

O P E R A T I N G   I N S T R U C T I O N S | FOS-HVS

8027445/V1-0/2022-06-15 | SICK

Subject to change without notice

Содержание FOS-HVS Duo 1600







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды