b
To replace the existing article with the loaded one, click
Restore
and click
OK
to
confirm.
Loading of the article is completed. Clicking
Cancel
cancels the loading and does
not overwrite the current article.
7.5.4.1.6
System parameters
Memory Usage
shows the current memory usage of the working memory and the
remaining free memory in MB.
Disk/sdcard usage
or
Disk/ram usage
shows the remaining external memory (SD card)
as well as the memory usage for the buffer memory in MB.
Figure 33: System parameters
7.5.4.2
Camera
page
Overview
The
Camera
page is used to select the desired camera for the relevant measuring head.
A reference image can be saved and loaded here for the configured camera, or an
image can be loaded from the camera.
Figure 34: Camera menu page
Function
Description
1
Selection of the desired camera.
NOTE
Regardless of the measuring head (Left_Master, Middle or Right),
the two cameras of a measuring head are always designated Ranger3-1 and
Ranger3-2. The camera mounted at the front of the measuring head during the
scan and looking backwards at the high-voltage battery is the Ranger3-1 camera.
The other camera is Ranger3-2
2
Load the saved reference image of this camera.
3
Save the camera image as a reference image after the scan run is complete.
The image is then available even after a system restart and can be reloaded
using
Load Reference
.
4
Capture an image directly from the camera.
This function provides assistance during setup or maintenance mode.
OPERATION
7
8027445/V1-0/2022-06-15 | SICK
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
41
Subject to change without notice
