manualshive.com logo in svg

SICK FOS-HVS Duo 1600, Руководство по эксплуатации

Поделиться
Скачать
SICK FOS-HVS Duo 1600 Скачать руководство пользователя страница 80

Function

Description

6

Upload a calibration file.
Clicking 

Upload

 opens the default directory in Explorer (navigate to the appropri‐

ate directory if necessary).
Clicking 

Open

 in Explorer starts the upload directly. The new calibration file will

then be available immediately.
The file must be of type *

.json

 and contain the correct sequence number 1

or 2 in the name based on the device. Accordingly, the appropriate 

Ranger3-1 -

Calibration

 or 

Ranger3-2 - Calibration

 page must be open.

Factory-supplied files for the respective system head are:

•

xxxxxxx_yycw_R1_CalibrationResult.json

•

xxxxxxx_yycw_R2_CalibrationResult.json

xxxxxxx

 = S/N of the system head

yycw

 = year and calendar week of production

Example: 

1234567_2213_R1_CalibrationResult.json

If the upload is successful, a corresponding message appears in the status bar.

7

Status message of the last action.

NOTE

The calibration is valid for the conditions existing at the time of calibration. This
includes the height of the measuring head above a reference on the inspection object
as well as the x and y alignment of the measuring head, and the alignment of the two
cameras and the laser in a measuring head to each other.
If one of these variables is changed by improper operation or by external influence, the
evaluation may be impaired.
Since the Foreign Object Detection System is intended to detect small defects and thus
small deviations from the normal state of an inspection object, even small changes in
positioning can lead to deviations in the inspection.

7.5.10

General

 menu group

The 

General

 menu contains functions that perform cross-application tasks and are

required for using the application or that provide settings that can be used for further
information.

7.5.10.1

App State

 page

The 

App State

 page shows the CPU load and the memory load in the upper area.

The list of individual apps is displayed in the lower area. This list is used for detailed
troubleshooting.

7 

OPERATION

80

O P E R A T I N G   I N S T R U C T I O N S | FOS-HVS

8027445/V1-0/2022-06-15 | SICK

Subject to change without notice

Содержание FOS-HVS Duo 1600







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды