SICK 6052873 Скачать руководство пользователя страница 9

Страница: 9 / 144

8017035/ZMO9/2017-06-08 • © SICK AG • Subject to change without notice.

Safety Precautions

2 Safety Precautions

Read this manual carefully to ensure safe and correct use of this product.

This manual contains safety precautions that are designed to protect your

health and property as well as the health and property of any other users

of this product. Follow the installation and operating procedures described

in this manual, and do not use this product in any manner not described

herein.

2.1

Safety Precaution Symbols

WARNING

Indicates that incorrect use may lead to a hazardous

situation resulting in injury or death.

CAUTION

Indicates that incorrect use may lead to a hazardous

situation resulting in injury or property damage.

2.2

Mandatory Precautions

WARNING

• Do not look directly at the laser beam or intentionally

shine the laser beam in another person’s eyes. Doing

so may cause eye damage.

• This product cannot be used as protective equipment

for the purpose of protecting the human body.

• Disassembling or modifying this product may cause

injury, fire, or electric shock.

• If you detect smoke or a strange odor during operation,

stop operating the product, and then stop the power

supply. If repairs are necessary, inform the distributor

that you purchased the product from.

• Use the product with the voltage indicated in the

specifications.

• Do not touch the product or its cable with wet hands.

Doing so may lead to electric shock.

• Do not perform wiring while the power supply is on.

Содержание 6052873

















































































































































Результаты поиска

Содержание 6052873

Отзывы:

Похожие инструкции для 6052873

Бренды по названию

Популярные бренды

SICK 6052873, Руководство по эксплуатации

Результаты поиска

Содержание 6052873

Отзывы:

Похожие инструкции для 6052873

Бренды по названию

Популярные бренды