SICK 6052873, Руководство по эксплуатации

Страница: 28 / 144

Operating the Sensor
28 © SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
Setting
item
Bank Setting value/
default value
General description
Storage N
Select data for storage.
OFF Storage not performed.
Measure Stores measurement values.
Profile Stores profile and measurement values.
No.of Data N Set the number of data saved starting from the start position.
1 to 65535 [1000] The upper limit is 8000 when storing a profile.
Start cond N Used to select storage start conditions.
Continue Storage always executed.
Hold in Starts storage operation on a Hold start of the external input terminal.
Measure Storage starts from the point that the specified measurement target becomes
measurable.
Alarm Storage starts from the instant that the specified measurement target becomes
not measurable.
UP limit Storage starts from the point that the specified measurement target exceeds the
threshold.
LOW limit Storage starts from the point that the specified measurement target falls below
the threshold.
Start pos N Set the storage start position for the trigger.
-10000 to +10000
[0]
[Unit: Number of samplings]
Using 0 as reference, a negative value indicates a previous position (pre-trigger)
while a positive value indicates a subsequent position (delay trigger). When the
storage target is profile, the value can be set in a range of -2000 to +2000.
Start target N Used to select the target of the storage start condition.
The condition to enable this function is: Start cond: Measure, Alarm, UP limit, or LOW limit
Area1 Storage starts based on an area 1 value.
Area2 Storage starts based on an area 2 value.
Area3 Storage starts based on an area 3 value.
Area4 Storage starts based on an area 4 value.
Calc1 Storage starts based on a calculation 1 value.
Calc2 Storage starts based on a calculation 2 value.
Threshold N Set the threshold when "UP limit" or "LOW limit" is selected for "Start cond".
The condition to enable this function is: Start cond: UP limit, LOW limit
-999.999 to
+999.999
[0]
Intermit-
tent
N Data storage interval. All data is stored when the setting value is "0".
0 to 8191 [10] [Unit: Number of samplings]