PRO2-Navigator Setup Software
54
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
Number Display item Description
Operation
9
Reset
Click this button to initialize the
settings.
“Bank Clear:” Click this button to initialize the settings
of the current bank.
“Reset:” Click this button to return all the settings
to their factory default values. When you execute this
operation, the sensor will restart, so communication
will be disconnected.
ß
Bank Copy
Click this button to copy the details
of the selected bank.
Click this button to copy the bank settings to a different
bank. When you click this button, a setup menu for selecting
the copy source and copy target will be displayed.
6.3.4
How to Change Settings
Writing settings
Setting changes are immediately applied to operation, but the changed
details are cleared when the power is turned off.
You can confirm the changed settings by clicking “Send Param” in the
upper left of the screen.
Alternatively, you can confirm the settings when configuring measurement
settings by clicking “Send PARAM” in the bottom right of the “Outputs”
setup screen.
If you attempt to exit the software without first confirming the settings,
a confirmation dialog box will be displayed.
