Sharp PN-80TC3, Руководство по обслуживанию

Страница: 20 / 210

PN-L803C/80TC3 OUTLINE OF THE PRODUCTS 1 - 15
4 – 2.SWITCHING THE SCREEN SIZE
Even when the screen size is changed, the display may remain the same depending on the input signal.
WIDE
PC input
Displays image so it fills the entire screen.
AV input
An image with a 4:3 aspect ratio is stretched to fill the entire screen.
ZOOM 1
PC input
An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing
the aspect ratio. The edges of the image may be cut off.
AV input
ZOOM 2
PC input
Use this size if ZOOM 1 cuts off the subtitles.
AV input
NORMAL
PC input
Displays image so it fills the screen without changing the aspect ratio of the input
signals.
AV input
Displays the entire image of the aspect ratio of 4:3 without changing the aspect ratio.
Dot by Dot
PC input
Displays the dots of the signals input from the connected PC as the corresponding
dots on the screen.
AV input
Displays the dots of the input signals as the corresponding dots on the screen.
(MEMO)
• Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial
or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright
Law, so please be careful.
• When dual-screen display is selected, the screen size cannot be changed.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this
monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen
size to “NORMAL”.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.