General
8
03.00 | ORG | Assembly and Operating Manual | en | 389246
1.4.2 Seals to be mounted
External assembly
Inner seal diameter between d1=10 mm and d1=60 mm
The necessary top jaws (gripper finger and segment jaws with
clamping jaws) must be selected depending on the seals being fitted.
d
2
NBR 70 Shore A VITON FPM 70 Quant-
ity
ID number
d
1min.
d
1max.
d
1min.
d
1max.
[mm]
[mm] [mm] [mm] [mm] [Pcs.]
0.5<d2<1.0 10
45
10
45
6
0304113
1.0<d2<2.0 10
55
10
45
6
0304114
2.0<d2<3.0 10
60
14
60
6
0304115
3.0<d2<4.0 15
60
24
60
6
0304116
The values given in this table are guide values and refer to seals
which are mounted at a distance P from the housing! Further seals
on request!
Range of inside seal diameter d1>d1max. to d1= approx. 150 mm
Mountable seals as well as segment jaws with clamping jaws upon
request!
Internal assembly:
Range of inside seal diameter: d1=10 mm to d1= approx. 120 mm
Mountable seals as well as segments jaws with clamping jaws and
gripper fingers Internal assembly on request!
Further information can be found in the catalog data sheet in the
appendix.
