SCHUNK ORG 85, Сборка и руководство по эксплуатации

Страница: 56 / 92

Function and handling
56
03.00 | ORG | Assembly and Operating Manual | en | 389246
5.4 Details of external assembly procedure, Range of inside seal
diameter between d1>60 mm and approx. d1=150 mm
Position of the item numbers Pneumatic connection [
}
21]
5.4.1 External assembly AM_2.1
External assembly AM_2.1, Range of inside seal diameter between d
1
>60 mm and
approx. d
1
=150 mm
The top jaws must be adjusted so that they are inside the non-
widened seal in the "CLOSED" gripper condition. Depending on the
ovality of the seal, there must be a sufficient safety distance at the
transfer point (dimension v) between the seal and the top jaws.
Moreover, the segment jaws must not collide in the "CLOSED"
gripper condition, i.e. a second safety distance (dimension w) must
be observed between the segment jaws.
NOTE
It must be checked whether the stroke of triple jaw A and triple
jaw B is adjusted so that the top jaws of the gripper do not
overstretch the seal in the opened condition!
• Open up the top jaws of the gripper without the seal!
(compressed air connections (3) and (4) pressurised
Pneumatic connection [ } 21]). Then, before proceeding with
the external assembly AM_2.2, adjust the jaw stroke to the seal
size to be assembled in accordance with chapter „Setting the
end positions“
Setting the end positions [ } 32]!