manualshive.com logo in svg

SCHUNK ORG 85, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK ORG 85 Скачать руководство пользователя страница 7

General

03.00 | ORG | Assembly and Operating Manual | en | 389246

7

1.1.2 Applicable documents

• General terms of business *
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
The documents marked with an asterisk (*) can be downloaded on
our homepage 

schunk.com

1.1.3 Sizes

This operating manual applies to the following sizes:
• ORG 85

1.2 Warranty

If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.

1.3 Scope of delivery

The scope of delivery includes
• O-ring gripper ORG in the version ordered
• Assembly and Operating Manual
• Accessory pack

1.4 Accessories

A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.

1.4.1 Seal kit

Content of the sealing kit:
• O-rings
• Quad ring

ID.-No. of the seal kit

Seal kit for

ID number

ORG 85

5516224

Contents of the sealing kit, 

Assembly drawing mounting kit

 [

}

 36].

Содержание ORG 85





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды