Function and handling
03.00 | ORG | Assembly and Operating Manual | en | 389246
55
5.3.5 External assembly AM_1.5
External assembly AM_1.5, Range of inside seal diameter between d
1
=10 mm and d
1
=60 mm
The entire gripper is now moved backward in axial direction,
whereby the seal is stripped off the three assembly fingers of the
triple jaw B and slides completely into the groove. The assembly
cycle has been completed.
5.3.6 External assembly AM_1.6
For another assembly cycle, move the triple jaws A and B as well as
the Z-stroke into the start-ing position.Close triple jaws A and B as
well as Z-stroke toward the front. Compressed air connection (1)
pressurised, compressed air connections (4) and (2) not pressurised
