Function and handling
03.00 | ORG | Assembly and Operating Manual | en | 389246
53
5.3.3 External assembly AM_1.3
wave
External assembly AM_1.3, Range of inside seal diameter between d
1
=10 mm and d
1
=60 mm
In the "OPEN" gripper condition, the seal must be widened
sufficiently so that a distance larger than zero (dimension y) is
created between the widened seal (shape of a hexagon) and the
shaft.
With the widened seal, the gripper can then be positioned at the
position / level of the seal groove of the shaft.
NOTE
Dimension y should be as small as possible to ensure a reliable
assembly cycle and to prevent overextension of the seal!
The centre axis of the gripper and the shaft must be aligned
concentrically!
