Assembly and installation
22
03.00 | ORG | Assembly and Operating Manual | en | 389246
4.3 Transfer point seal
NOTE
To allow the reliable reception of the seal, a transfer point must
be defined.
The transfer point of the seal is to be designed as follows:
Ø
The seal must be prepositioned on a plane parallel to the
direction of movement of the triple jaws.
Ø
The centre axis of the seal is to be concentric with the centre
axis of the O-ring gripper.
Ø
Furthermore, the seal, as far as possible by means of
separation, should be provided in a round shape especially for
large seal diameters to be assembled and for internal
assembly.
Ø
The assembly fingers and segment jaws must have sufficient
space at the transfer point to pick up the seal.
