Maintenance
03.00 | ORG | Assembly and Operating Manual | en | 389246
79
7 Maintenance
7.1 Notes
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
Exchange of housing and base jaws
The base jaws and the guidance in the housing are matched. To
exchange these parts, send the product with a repair order to
SCHUNK or order the housing with the base jaws as a set.
7.2 Utensils required for maintenance
Position of the item numbers
Tools
Torque wrench
Grease
Renolit HLT2
GP303P
Adhesive
Adhesive from Weicon 302-41
(40-45/63/ 64)
Equivalent adhesives and activators from other manufacturers
may be used.
7.3 Maintenance and servicing intervals
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Interval [Mio. cycles]
2
Carry out maintenance on the gripper once every 2 million cycles.
During the maintenance work, certain parts must be installed with
oil or grease (basic greasing).
All seals of the gripper must be replaced during each maintenance
7]. The complete seal set is available from SCHUNK.
