manualshive.com logo in svg

Schiller DEFIGARD Touch 7, Руководство пользователя

Поделиться
Скачать
Schiller DEFIGARD Touch 7 Скачать руководство пользователя страница 15

Page 15

Safety notes

1

User guide

Additional Terms

1.11

A

rt.

 no.

:  0-48-

0227

  Rev.:

 g

DEFIGARD/PHYSIOGARD Touch 7

1.11 Additional Terms

1.11.1

Implied Authorisation

Possession or purchase of this device does not convey any express or implied license
to use the device with unauthorized sensors or cables which would, alone or in
combination with this device, fall within the scope of one or more of the patents
relating to this device.

1.11.2

Terms of Warranty

Your SCHILLER 

DEFIGARD

®

Touch 7

 & 

PHYSIOGARD

®

Touch 7

 is warranted

against defects in material and manufacture according the general term of conditions.
Excluded from this guarantee is damage caused by an accident or as a result of
improper handling. The warranty entitles free replacement of the defective part. Any
liability for subsequent damage is excluded. The warranty is void if unauthorised or
unqualified persons attempt to make repairs.

In case of a defect, send the apparatus to your dealer or directly to the manufacturer.
The manufacturer can only be held responsible for the safety, reliability, and
performance of the apparatus if: 

• assembly operations, extensions, readjustments, modifications, or repairs are

carried out by persons authorised by him, and 

• the 

DEFIGARD

®

Touch 7

/

PHYSIOGARD

®

Touch 7

 and approved attached

equipment is used in accordance with the manufacturer's instructions.

There are no express or implied warranties which extend beyond the warranties
hereinabove set forth. SCHILLER makes no warranty of merchantability or fitness for
a particular purpose with respect to the product or parts thereof.

Содержание DEFIGARD Touch 7





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды