sauter equitherm EQJW126F001, Монтаж и эксплуатация

Страница: 15 / 110

Operation
BA_EQJW126F001_EN001
13
Note:
– The extended information level is deactivated when the key number 1999 is
re-en- tered.
– The key number 1999 cannot be used to change the controller
configuration and parameterization. A separate key number exists for
configuration and parameterization. Refer to section 2.
1.8.1 Setting public holidays
On public holidays, the times-of-use specified for Sunday
apply. A maximum of 20 public holidays may be entered.
Parameter WE Level / Range of values
Public holidays – Extended information
level/
01.01 to 31.12
Proceed as follows:
1. In the extended information level (normal
switch position ) select data point for
public holidays [

].
Display:
2. Open data point for public holidays.
3. If applicable, select – – – – .
To enter additional public holidays, re-select – – . – – and repeat the steps 4
to 6.
Note: Public holidays can also be set in PA5 parameter level (–> section 2.2).
Deleting a public holiday:
1. Under data point for public holidays, select the holiday you wish to delete [

].
2. Confirm selection ].
4. Activate editing mode for public holiday
[ ]. and blink.
5. Select public holiday [

].
6. Confirm public holiday [ ].