sauter equitherm EQJW126F001, Монтаж и эксплуатация

Страница: 21 / 110

BA_EQJW126F001_EN001
19
Start-up
6. Select function block [

].
Activated function blocks are marked by “- 1“.
Deactivated function blocks are marked by “- 0“.
7. Activate editing mode for the function block
[ ]. blinks.
8. Activate the function block
[

]. Display: F__ - 1
An activated function block is indicated by a black square below (right) the
function block number in the top row of the controller display.
or:
Deactivate the function block [

].
Display: F__ - 0
10. Confirm settings [ ].
If the function block is not closed, further function block parameters can be
ad- justed.
Proceed as follows:
a) Select function block parameter [

].
b) Confirm function block parameter [ ].
If applicable, the next function block parameter is displayed.
Confirm all parameters to exit the opened function block.
To adjust additional function blocks in the open configuration level, repeat
the steps 6 to 10.
11. Select End [

].
12. Exit configuration level ].
To adjust additional function blocks in the other configuration levels, repeat 4
to 10.
13. Return the rotary switch to normal switch position (information level).