sauter equitherm EQJW126F001, Монтаж и эксплуатация

Страница: 17 / 110

Operation
BA_EQJW126F001_EN001
15
To enter additional vacation periods, re-select – –.– – and repeat the steps 4 to 9.
Note: Vacation periods can also be set in PA5 parameter level (–> section 2.2).
Deleting vacation periods:
1. Under data point for vacation periods, select the start date of the
period you wish to delete [

].
2.
Confirm selection ].
3. Select – –.– – [

].
4. Confirm selection ].
The vacation period is deleted.
Note: Vacation periods should be deleted by the end of the year so that they are
not car- ried on into the following year.
4. Activate editing mode for start date of
vacation period [ ].
and blink.
5. Edit start date of vacation period [

].
6. Confirm start date of the vacation
period. Display: STOP, – –.– –
7. Edit end of vacation period [

].
8. Confirm end of vacation period [ ].
The black square at the top of the display
indicate the assignment of the vacation
periods to the indi- vidual control circuits.
9. Select the control circuit to which the current
vaca- tion period should apply [

].
Current vacation period applies to heating
cir- cuit 1