sauter equitherm EQJW126F001, Монтаж и эксплуатация

Страница: 22 / 110

Start-up
20
BA_EQJW126F001_EN001
2.2 Changing parameters
Depending on the set system code number and the activated functions, not all
parame- ters listed in the parameter list in the Appendix (–> section 12.2) might be
available. The parameters are grouped by topics:

PA1: Rk1 (Heating circuit 1)

PA2: Not applicable

PA3: Not applicable

PA4: Not applicable

PA5: System-wide parameters

PA6: Communication parameters
1. Turn the rotary switch to (configuration and parameter
level). Display: 0 0 0 0
2. Set valid key number [

].
3. Confirm key number ].
Display: PA_
4. Select parameter level [

].
5. Open parameter level ].
6. Select parameter [

].
7. Activate editing mode for the parameter
]. blinks.
8. Edit the parameter [

].
9. Confirm the parameter [ ].
To adjust additional parameters in the open parameter level, repeat steps
6 to 9.
10. Select End [

].
11. Exit parameter level ].
To adjust additional parameters in another parameter level, repeat steps 4 to 9.
12. Return the rotary switch to normal switch position (information level).