Samsung AM080JXVHGH/EU, Руководство по установке

Страница: 95 / 122

95
ENGLISH
Basic segment display
Step Display content Display
At initial power input Checking segment display
SEG 1 SEG 2 SEG 3 SEG 4
“8” “8” “8” “8”
While setting communication
between indoor and outdoor unit
(Addressing)
Number of connected indoor
units
SEG 1 SEG 2 SEG 3 SEG 4
“A” “d”
Number of
communicated units
❋
Refer to "View Mode"
for communication
address
After communication setting
(usual occasion)
Transmit/Reception address
SEG 1 SEG 2 SEG 3 SEG 4
I/U: “A”
MCU: “C”
I/U: “0”
MCU: “1”
Reception address (in
decimal number)
❇ ❇
I/U : Indoor unit
Setting outdoor unit option switch and key function
Setting outdoor unit option switches : A TYPE
❇ ❇
If you install HR products, you must match the address between the MCU and the indoor unit .
Switch Setting Function Remarks
SW51 /
SW52
Setting total number of installed indoor unit
SW51: Tens digit, SW52: Units digit
Setting can be done from the main outdoor unit
only (sub unit: setting is unnecessary)
Ex) When 12 indoor units are installed

SW51: 1, SW52: 2
SW53
K6
On
Enable maximum capacity restriction for cooling
operation Restrict excessive capacity increase when
operating indoor units with small capacity
Off
Disable maximum capacity restriction for
cooling operation
-
K7 K8 Selecting outdoor unit address
On On Outdoor unit address: No . 1 Main unit
On Off Outdoor unit address: No . 2 Sub unit 1
Off On Outdoor unit address: No . 3 Sub unit 2
Off Off Outdoor unit address: No . 4 Sub unit 3
SW57 Setting total number of connected MCU
Setting can be done from Main unit only .
Ex) When 3 MCUs are installed
 SW57:3, When
10 MCUs are installed  SW57:A
DVM S HE_IM_DB68-05461A-08_EN.indd 95 2017-03-24 오후 1:38:44