Samsung AM080JXVHGH/EU, Руководство по установке

Страница: 111 / 122

111
ENGLISH
Auto trial operation
1 . If the Auto Trial Operation is not completed, normal operation will be prohibited .
- When the auto trial operation is not completed, UP (UnPrepared) will appear on the segment after the
communication check and restrict compressor from operating . (UP Mode will be cleared automatically when auto
trial mode is completed .)
- Auto trial operation may take 20 minutes to maximum 2 hours depending on the operation status .
- During auto trial operation, noise can be generated due to valve inspection . (Check the product if abnormal noise
occurs continuously)
2 . When error occurs during auto trial operation, check the error code and take appropriate measures .
- Refer to next couple of pages when E503, E505 or E506 error occurs .
3 . When auto trial operation ends, use S-NET pro or S-CHECKER to issue a result report .
- Refer to service manual if you have any items with “NG” on the result report .
- After taking appropriate measure for the items with “NG”, run the auto trial operation again .
4 . Check the following items by running trial operation (cooling/heating) .
- Check if cooling/heating operation performs normally .
- Individual indoor unit control: Check for air flow direction and fan speed .
- Check for abnormal operation noise from the indoor and outdoor unit .
- Check for proper draining from the indoor unit during cooling operation .
- Use S-NET pro to check the detail operation status .
5 . Explain to the user how to use the air conditioner according to the user's manual .
6 . Hand over the installation manual to the customer so they can keep it with them .
CAUTION
• Make sure to close the top and bottom part of
the outdoor unit cabinet during operation . If you
operate the unit with the front cabinet open, it
may cause damage to the product and you may
not get the precise data from S-NET pro .
DVM S HE_IM_DB68-05461A-08_EN.indd 111 2017-03-24 오후 1:38:48