Saluki Technology S3302A, Техническое описание

Страница: 129 / 161

Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
129
2 Span menu
Span
Span
Last Span
< Back
[Span]:
Press [Frequency]→[Span] to activate the span menu. Set the span
with the number keys, or change the span by selecting the frequency unit or
with the [↑] or [↓] key or knob.
· [Special note]:
When the span is changed with the [↑] or [↓] key or
knob, the step should be 1-2-5.
· [Last span]:
Press [Frequency]→ [Span]→ [Last Span] and recover the
last span.
· [Back]:
Press [Frequency]→ [Span]→ [Back] to go back to the
[Frequency] menu.
3 Amplitude menu
Ref Level
0.0dBm
Amplitude
Ref Position
Atten
Auto Man
Scale/Div
10.0dB
Pre-amplifier
Off On
· [Reference level]:
Press [Amplitude]→ [Ref Level] and set it withe number keys
on the front panel. Select [dBm], [-dBm], [mV] or [uV] in the frequency unit
menu, or set the value with the [↑] or [↓] key or knob.
· [Special note]:
When the [↑] or [↓] key or knob is appli
ed, the step should be
10dB.
· [Reference position]:
Press [Amplitude]→ [Ref Position], and set the reference
position with the number keys or [↑] or [↓] key or knob.
· [Atten Auto Man]:
Press [Amplitude]→[Atten Auto Man] to enable the auto or
manual mode of the attenuator. You can change the mode with the number keys or
the [↑] or [↓] key or knob.
· [Special note]: The attenuation range is 0dB to +60dB, with the step of 10dB.
· [Scale/Division]:
Press [Amplitude]→[Scale/Div] and set it with the number
keys
or the [↑] or [↓] key or knob. The scale/division setting range is 0.1dB
-20dB.
· [Pre-amplifier Off On]: Press [Amplitude] to control the ON/OFF state of the
pre-amplifier. This function cannot be activated until the reference level is less
than -40dBm.