Rural King RK37 Hydrostatic Скачать руководство пользователя страница 84

Страница: 84 / 182

OPERATION

3 - 5

6. TuRNINg IN fIEld

①

To turn in a field, release the

hook for the left and right brake

pedals.

②

Turn the steering wheel and

depress the brake pedal for the

desired direction.

③

While turning, keep the engine

speed low and turn slowly.

Avoid turning at a high speed.

The tractor can fall on its side.

When the tractor is installed

with an implement, its overall

length becomes large. Be extra

care with other people and ob

jects around when turning.
Connect the left and right brake

pedals when it is about to drive.

•

wARNINg

7. sTOPPINg ANd PARkINg

①

Operate the throttle lever to set

the engine at a low speed.

②

Release the forward driving ac

celerator pedals slowly. Depress

the brake pedals for abrupt brak

ing.

③

When the vehicle is completely

stopped, set the shift lever in the

neutral position.

④

Apply the parking brake.

⑤

If an implement is attached to the

vehicle, lower it.

RK3O301A

T39O01B

Interlock

Raise: Open

Throttle Pedal

Brake Pedal

RK37S,RK37SC-영문-03(다).indd 5

2017-03-09 오전 9:14:14

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 84 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: