Rural King RK37 Hydrostatic Скачать руководство пользователя страница 83

Страница: 83 / 182

3 -

OPERATION

5. sTARTINg Off, shIfTINg ANd dRIvINg

sTARTINg Off

①

Confirm that the left and right

brake pedals are interlocked.

Make sure to interlock the left

and right brake pedals unless
working in a field.

②

Lift an implement.

③

Place the main shift lever, range

shift lever and shuttle shift lever

into the desired positions.

④

Depress the brake pedal to

release the parking brake.

►

⑤

Release the clutch pedal slowly

while depressing the throttle
pedal to increase the engine
speed.

shIfTINg ANd dRIvINg

To shift during driving, depress the

clutch pedal to stop the vehicle in

advance.

►

The driving speed in the reverse

direction is almost the same to

the speed in the forward direc

tion. Make sure to check the

surroundings carefully when

driving backward.
Especially, never drive back

wards with the range shift lever

in the position H. The driving

speed becomes faster and it

can cause an accident.

•

wARNINg

T39O01B

Interlock

Lower: Lock

Make sure to keep the following in

structions for the initial 50-hour use.

(1) Avoid abrupt starting and abrupt

stopping.

(2) Do not use excessive speed or

load.

(3) Drive the tractor only when the

engine is sufficiently warm.

(4) Do not idle the engine at the

maximum speed.

(5) Check each part and change oil

and fluid after 50-hour use.

(6) Refer to the section Maintenance

for adding and changing engine

oil.

4. RuNNINg-IN PERIOd

Throttle Pedal

Brake Pedal

RK37S,RK37SC-영문-03(다).indd 4

2017-03-09 오전 9:14:13

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 83 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: