manualshive.com logo in svg

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 178 / 182

Поделиться
Скачать
Rural King RK37 Hydrostatic Скачать руководство пользователя страница 178

12

 - 1

WARRANTY

12

RK

WARRANTY

All products manufactured and supplied by RK have been designed and manufactured in 
compliance with all laws and regulations concerning agricultural equipment. If maintained 
and used in accordance with the inspections, regular maintenance and usage guidelines 
specified in the user's manual, this product is guaranteed to always safely maintain its 
optimum state and performance, as well as being guaranteed as follows.

1. Scope of Warranty

※

 (Tractor Non-Rental & Non-Commercial)

 

If the agricultural equipment which you purchased is maintained and used normally in 
accordance with the inspections, regular maintenance and usage guidelines in the user's 
manual provided by our company, our company shall provide repairs and replacement at our 
expense for any parts which are revealed by technical analysis during the warranty period 

below to be defective due to a flaw in the materials or manufacturing.

 3. RK WARRANTY

RK37S,RK37SC-영문-12-보증서.indd   13

2017-03-09   오전 10:09:20

Содержание RK37 Hydrostatic























































































































































































Отзывы:

Нет отзывов