Rural King RK37 Hydrostatic Скачать руководство пользователя страница 23

Страница: 23 / 182

- 22

SAFETY PRECAUTIONS

1. At least on a daily basis check all

oil levels. Water level in the radia-

tor and electrolyte level in the bat-

tery and perform services accord-

ing to the service schedule.

2. Ensure tire pressure are even

and the correct pressure for the

job being done is maintained.

3. Check to ensure that the all con-

trols and preventative mech-

anisms of the tractor and im-

plement work correctly and

effectively.

4. Ensure that an adequate set of

the correct tools is available for

maintenance and minor repairs.

5. Ensure that all service work and

repairs are carried out on a flat

area with a concrete or similar

floor.

Do not carry out service work on

a tractor until it is switched off,

and the parking brake applied

and wheels choked.

SAFETY TIPS DURING MAINTENANCE

Where a tractor is started in a

confined area, ensure that the

area is well ventilated as exhaust

gases are very harmful, and can

cause death.

6. Do not work under raised imple-

ments.

7. When changing wheels or tires

ensure that a suitable wheel

stand is placed under the axle

prior to removing the wheel and

the wheels are chocked.

8. Where guards or shields need to

be removed to perform a service

or repair, ensure that the guard

or shield is correctly reinstalled

before starting the tractor.

9. Never refuel near a naked flame

or with an overheated engine.

Ensure to turn off Engine before

refueling.

10. The cooling system operates un-

der pressure, take care when re-

moving the radiator cap on a hot

engine to prevent being scald-

ed by steam or hot water. Do not

add water in the radiator when

the engine is hot. Add water to

the radiator only after the engine

cools down completely.

11. To prevent fires keep the tractor

including the engine clean and

free from inflammable materi-

al and well away from fuels and

other inflammable material.

RK37S,RK37SC-영문-01A(안).indd 22

2018-12-06 오후 4:32:58

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 23 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: