Rural King RK37 Hydrostatic Скачать руководство пользователя страница 180 | Manualshive

Страница: 180 / 182

Rural King RK37 Hydrostatic Скачать руководство пользователя страница 180

12

- 1

WARRANTY

12

RK

COVERAGE

This Limited warranty is limited to RK repairing or replacing, at RK's option, warranted
parts by an authorized RK RK Tractor store at no charge for either the parts or services.
Parts replaced under this Limited Warranty are only warranted for the balance of the

warranty period.

1. RK shall have no obligation or liability under this warranty.

(1) for normal maintenance or operation services for Products, including but not limited to,

providing lubricants, fuel, tune-up inspection or adjustments.

(2) for any consumable parts when such parts are replaced as a part of normal maintenance or

operating services.

(3) to any exclusions and limitations contained in the Limited Warranty.

2. Options, accessories, attachments installed by RK Tractor stores which are not

manufactured by RK will not be warranted in any way by RK. For information about
the warranty or to obtain warranty service on such parts, RK Tractor stores should
contact the manufacturer directly

RK37S,RK37SC-영문-12-보증서.indd 15

2017-03-09 오전 10:09:21

«
...
178
179
180
181
182
»

Содержание RK37 Hydrostatic























































































































































































Отзывы:

Нет отзывов