Rural King RK37 Hydrostatic Скачать руководство пользователя страница 154

Страница: 154 / 182

9 -

Safety Standard for farm work

439

7. tractor



Manage PTO

- Stop PTO before stopping the engine.

- Do not remove the PTO protective cover or protec-

tive panel for operating machine.

- Do not use PTO adaptor in order to extend the POT

coupler or universal joint to outside of PTO protec-

tive cover.



To repair, secure the wheel width, or changing the

wheel under either tractor or trailer, with the tractor or

trailer raised, choke the wheels that are on the ground.



Do not use hydraulic jack for operating machine or

tractor. Instead, use block or stand.



Safety frame

- Do neither weld nor drill a hole on the attached safe-

ty frame. Also do not modify it.

- Replace the damaged safety frame with a new one.

- If the safety frame was removed for specialized

work, restore it immediately.



Be careful to touch dangerous area such as power

transmission gear, rotating unit, etc. Put on a protec-

tive cover.



Do neither modify nor remove the safety device.



When checking and replacing the blade to plow the

ground.

- Stop the engine.

- Prevent the rotary from falling by turning the fall ad-

justing handle to stop hydraulic pressure.

- Apply the parking brake.

- Do not stand between tractor and rotary.



When working with rotary

- Do not put your hands near the rotating part such as

blade axle and universal joint.

- Do not ride on the rotary.

- When driving backward or turning quickly with the rota-

ry raised up, make sure to check behind the machine.

- Adjust the rear cover.

RK37S,RK37SC-영문-09(자).indd 7

2017-03-09 오전 9:56:51

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 154 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: