Rural King RK37 Hydrostatic Скачать руководство пользователя страница 64

Страница: 64 / 182

2 - 1

DESCRIPTION OF TRACTOR CONTROLS

PARKING BRAKE LEVER

①

With the right brake pedals inter-

locked, depress the brake pedal

with a right foot firmly and pull up

the parking brake lever to lock

the pedals.

②

To release the parking brake, de-

press the brake pedal firmly.

►

The brake discs can be worn

prematurely if driving the ve-

hicle with the parking brake en-

gaged partially.

•

NOTE

This  control  allows  shifting  from
forward  to  reverse  &  reverse  to
forward.  When  stationary  set  the
lever to "N" for neutral.



Push the lever away from the

driver engages forward.



Pulling the lever towards the

driver engages reverse.

T72O316A

SHUTTLE SHIFT LEVER

►



Press clutch pedal fully

before operating shuttle shift
lever.



When changing from forward

to reverse or back to forward
again  while  in  high  range
make sure the tractor comes
to  a  stop  before  changing
direction. Failure to do so is
likely  to  result  in  damage  to
the  mechanism  and  place
the driver at risk of injury.

Shuttle Shift Lever

CAUTION



Operate the shuttle shift only

while seated on the tractor.



Do  not  use  the  shuttle  shift
lever  to  start  the  tractor  for
towing  or  traveling  uphill,
use the clutch instead.



A l w a y s s t o p t h e t r a c t o r

before getting off.

IMPORTANT

T39O315B

Brake Pedal

Throttle Pedal

Parking Brake Lever

RK37S,RK37SC-영문-02(나).indd 17

2018-02-01 오후 2:51:32

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 64 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: