Rural King RK37 Hydrostatic Скачать руководство пользователя страница 81

Страница: 81 / 182

3 -

OPERATION

hOw TO sTART ENgINE

①

Make sure that there is no ob-

stacle around the tractor.

②

Seat on the driver's seat and

confirm that the parking brake is

applied.

③

Check that each shift lever and

PTO switch are in the neutral

position.

④

Pull the throttle lever halfway.

⑤

Depress the clutch pedal. The

safety switch is activated.

⑥

Insert the key into the main

switch and turn the switch to

the "ON" position. Check that

the engine oil lamp and charge

warning lamp come on.

⑦

Turn the main switch to the

"START" position. When the

engine is started, release the

switch.

⑧

Confirm that all monitoring lamps

go off after the engine is started.

►

1. ENgINE sTARTINg

The engine will not start unless

the brake pedal is depressed.
Do not turn the main switch to

the "START" position while the

engine is running.
Avoid running the start motor

over 10 seconds. It consumes a

lot of current.

If the engine cannot be started

within 10 seconds, wait for 30

seconds and try it again.
The engine cannot be started

unless the driver is seated on

the driver's seat. Start the en-

gine on the driver's seat.

•

NOTE

Never start the engine by con

necting the start motor terminal

or safety switch directly. The

tractor may move suddenly and

cause an accident.

•

wARNINg

RK37S,RK37SC-영문-03(다).indd 2

2017-03-09 오전 9:14:12

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 81 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: