Rural King RK37 Hydrostatic Скачать руководство пользователя страница 15

Страница: 15 / 182

- 1

SAFETY PRECAUTIONS

T72O211A

Use of hazard warning lights and

turn signals are recommended when

towing equipment on public roads

unless prohibited by state or local

regulations.
Use slow moving vehicle (SMV) sign

when driving on public road during

both day & night time, unless pro-

hibited by law.

ALWAYS USE SAFETY LIGHTS AND

DEVICES

T72O212A

Understand service procedure be-

fore doing work.
Keep the surrounding area of the

tractor clean and dry.
Do not attempt to service tractor

when it is in motion.
Keep body and clothing away from

rotating shafts.
Always lower equipment to the

ground. Stop the engine.
Remove the key. Allow tractor

to cool before any work repair is

caused on it.

PRACTICE SAFE MAINTENANCE

Securely support any tractor ele-

ments that must be raised for ser-

vice work.
Keep all parts in good condition and

properly installed.
Replace worn or broken parts. Re-

place damage/missing decals.
Remove any buildup of grease or oil

from the tractor.
Disconnect battery ground cable(-)

before making adjustments on elec-

trical systems or welding on tractor.

RK37S,RK37SC-영문-01A(안).indd 14

2018-12-06 오후 4:32:45

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 15 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: