Rural King RK37 Hydrostatic Скачать руководство пользователя страница 121

Страница: 121 / 182

6 - 4

CABIN SYSTEM

REARvIEw MIRRORS

The cab is provided with rearview

mirrors on both sides. They can be

adjusted and folded, whenever nec-

essary, to avoid interference with

external obstacles.

The mirror have a telescopic arm to

allow positioning for maximum con

venience by the user.

Remember that mirrors must always

be positioned in compliance with

road traffic regulations when driving

on a public highway.

►

CAB CEIlINg

The ceiling is padded with insulation

material to block heat radiation into

the cab and keep the temperature

down when working in very sunny

areas.

The cab platform is covered with a

"firm grip" carpet in the most com

monly used areas.

It is recommended to keep this car-

pet clear of earth, mud, etc. so that

the operator may get on and off the

tractor in full safety.

►

wORkINg lAMpS (FRONT

ANd REAR)

The working lamps are located on

the cab roof (Two in the front and

two in the rear). They are switched

on by means of the special switches

on the roof console.

►

T39O605A

Working Lamp

RK37S,RK37SC-영문-06(바).indd 4

2017-01-13 오전 10:49:11

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 121 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: