Rural King RK37 Hydrostatic Скачать руководство пользователя страница 104

Страница: 104 / 182

5 - 11

Maintenance and service

435

(3) Fuel filter cleaning and

element replacing

This filter is to remove foreign mate-

rial and water from fuel.

①

Set the fuel filter cock to the

'OFF' position.

②

Loosen the ring screw on top

of the cap to remove the cap.

Then,

③

Flush the element with diesel fuel

to remove any foreign material

from it.

④

If the element is severely con-

taminated, replace it with a new

one.

Clean or replace the fuel filter

every 100 hours of operation.

•

nOte

7. checking and cleaning air cleaner

Check and clean the air cleaner ac-

cording to the following instructions:

< cautions for inspection and

service of air cleaner >

(1) Use the standard element and

filter and do not apply oil on

them.

() Remove any dust in the cover

thoroughly.

(3) Install it firmly so that dust does

not enter below the cover.

() Never drive with the element and

filter removed.

T53O50A

Air cleaner body Element

vacuuM valve cleaning

Pull out the valve with a hand and

remove dust from its inside. If it

is dirty or watery, wipe it with a

dry rag thoroughly before fitting it

again.

►

•

RK37S,RK37SC-영문-05(마).indd 11

2018-12-11 오전 8:47:42

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 104 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: