Rural King RK37 Hydrostatic Скачать руководство пользователя страница 151

Страница: 151 / 182

9 -

Safety Standard for farm work

3. cautIonS durIng the work



Do not load anything that can interfere driving.

- Always keep the driver’s seat clean.



Always buckle up when driving.



Opening radiator cap when heated can spring out the

steam to have the operator burned. Open the cap af-

ter it is sufficiently cooled down.



Do not drive with depressing the differential gear pedal.



Prohibit anyone to get on the machine.

- Prohibit anyone to get on the machine other than

the designated place.

- Even thought there are some designated place, do

not let people more than capacity get on the machine.

- Never let any passenger mount on the machine.

Also, do not put any object on the machine. Keep

people away from the machine.

- Do not jump on/off the operating machine except for

emergency.



Be cautious not to let anyone touch the belt . Always

check the connected area of belt.



When two people are working collaboratively, ex-

change signals each other.



Prevent injury

- Do not touch power transmission gear, rotating unit,

and other dangerous parts.

- Pay special attention if you are working with the ma-

chine with blade or sharp projection

- Be careful not to injure from the work where soils

and stones are scattered around.



Safety in inspection, adjustment, etc.

- Make sure to stop the motor and carry out the work

in a safe environment.

- When leaving the machine for a break, or other rea-

son, leave the machine in a safe place and descend

the working unit to keep them in a safe stopped state.



Removing and installing should be carried out in a

safe place and with a safe method.



Do neither stay nor insert foot under the working units.

RK37S,RK37SC-영문-09(자).indd 4

2017-03-09 오전 9:56:50

Содержание RK37 Hydrostatic























































































































































































Результаты поиска

Содержание RK37 Hydrostatic

Отзывы:

Rural King RK37 Hydrostatic, Руководство оператора, Страница: 151 / 182

Результаты поиска

Содержание RK37 Hydrostatic

Отзывы: